Headset uses the bone conduction speaker so the sound can pass through the skull directly to the auditory center, which eliminates many steps of acoustic transmission. It can achieve clear sound reduction in a nousy environment, so as to release the ears and revert to the delicate tone function.
Sports masks use one-way breathing valve. When one exhales, the silica films will bounce and discharge exhaled gas. It neither becomes stuffy, nor foggy when wearing glasses. When inhales, the silica films will fall, enabling the air to be breathed in through a cotton filter which can effectively filter out exhaust from automobiles and particulates that has the minimun diameter of 3 microns (less then PH2.5). The filter is of KN95 filter level which is especially suitable for sports like cycling and jogging.
2. How to wear?
Hang 2 at the back of the neck and tighten up using Velcro so that both sides of the speakers stay close to the cheek bone near the ears.
Wear 1 on the head and tighten the buckle above the ear.
3. How to operate?
Press and hold the power button for two seconds until the blue light which indicates power is on. For first time matching, hold the power button until the
indicator light flashes, indicating pairing mode. Turn on Bluetooth on mobile phones and search for the product. Click the pair option. After matching for
the first time, the headset will automatically connect after pressing power button within 10 seconds.Click "+","-" to increase or decrease volume. Hold "+"
to fast forward to the next song. Press the volume key "-" to go back to the previous song. Press the power key to pick up or hang up incoming calls.
Click play or pause when playing music.
Playback time: up to 7 hours
The standby time: up to 15days
Fully charging time: 2 hours
Bluetooth version: 4.0
Transducer sensitivity: 100±3dB
Microphone sensitivity: -50±3dB
Weight: 133 grams
5.Storage and maintenance
Products should be stored under a cool and dry environment with 0~45℃ temperature. This product is not entirely waterproof so do not use underwater.
Check before charging if there is any liquid to prevent headset damage. Please adjust the volume when using the headset to avoid hearing damage.
Wireless bone conduction headphones anti pollution mask Specification:
Bone conduction technology speaker, 1w dual speaker
320mAh Polymer battery
Anti‐interference microphones, ‐50DB
Blue tooth Version
MICUSB port and need 2h
Red light flashing rapidly: Lack of Power
Red Light on: charging
Blue Light on: full charged
Blue and red lights flashing: Matching
Blue light double flash slowly: fail to match, maybe the device is power off, or the distance of both is over 15m
Blue light flash slowly: Matched/dialing/playing audio.
Blue light flashing rapidly: call coming
Click the Power button
Click the Power button
Long press Power button for 1s
long press “+”“-” button
click the vol button “+”“‐”
BONE CONDUCTION HEADPHONES Specification
Play/Pause phone music
click Power button
long press Power button 3 seconds
Long press power button 3 seconds
Shut down state long press power button
buzzing twice and prompt tone
Click “+” “-“
1. Shutdown state long press power button 6seconde
2.Search Bluetooth device on your phone or other digital products, then choose Lead-out.
If it is 1st time to match, it will automatically enter the match mode once the bt headphone turning on.
And the LED lights will alternate flash between blue and red.
If the connecting distance is beyond the BT headphone effective range(10m or 33feets), the headphone will disconnect with the device.
Once in effective range again, they will connect again automatically. But if the disconnecting continues for long time(over 3mins), you maybe need manual matching