Electric Nail Drill Machine Set Manicure Pedicure Tool Set Bits Cleaner Sanding Band Rotary Tools

معرف المنتج BG1063507MZ

متوفربالمخزون

مشاهدة سريعة

Electric Nail Drill Machine Set Manicure Pedicure Tool Set Bits Cleaner Sanding Band Rotary Tools

متوفربالمخزون

526 ر.س.‏

حقول مطلوبة *

526 ر.س.‏

التفاصيل

Featrures:

Easy to use dialing speed control.

Forward and reverse operation switch.

Optional foot pedal for easy operation.

Low noise and vibration for smooth and long-time operation.

Improved hand piece cable ending design so that the cable will not loose out easily.

Improved hand piece holding area to prevent overheating during a long period of usage.

It can be used for natural as well as artificial nails.



Description:

Color: As seen from the picture

Rated voltage range: 110-220V/60Hz, 220-240V/50Hz 

Rated Power input: 18W/32W

Output rated Voltage: DC0-12V/18V

Working voltage: DC0-12V/18V

Rated current: 1.5A/1.8V

Rated Speed: 0-20000RPM/30000 RPM.

Package size: App 24.4 X 20.2 X 9.5cm

Weight: App 1484g


Adapter: We will send you an adapter according to your living country



Package Included:

1 X Electric Nail Drill Machine: Main control + Handpiece

1 X Table Stand

1 X Foot Pedal Power Control

6 X Optional Bits

6 X Standing Bands

30 X Electric Nail File Drill Bits (With 3/32" (2.35mm) shank size)

50 X Sanding Bands with degree 80"

50 X Sanding Bands with degree 100"

50 X Sanding Bands with degree 120"

1 X Operation Manual












































Operation Details:

Plug in the electric cord of the transformer to the main electric outlet.

Turn on the on / off switch on the transformer. (machine should be at the lowest speed when turning on)

Select the desired speed by turning the variable speed control knob on the transformer. 

The black switch in front of the transformer, next to the speed control selection knob is for forward and reverse rotation direction.

To use the foot pedal control, step on the pedal the speed will be accelerated, loose foot, the speed will decrease (foot switch is optional).

More details, find in the Manual.



Safety Rules:

Always unplug the tool when you change accessory or collets.

Do not engage the shaft lock button while the tool is running.

Do not use or place it near / in water. If motor falls into water, unplug it immediately.

Do not touch the bit after use. The bit is too hot to be touched by bare hands.

Keep dust out of eyes and lungs by using protective eyewear or a dust mask.

Always unplug it after use. When the machine is not in use, all tool must be stored in a dry place 

and keep out of the reach of children.