Item Type: DIY Face Mask Machine
Material: ABS + Stainless Steel
Rated Voltage: 110-220V
Rated Power: 90W
Mask Temperature: 80 Degrees Celsius
Production Time: 5Min
Maximum Water Capacity: 100ml
Size: 16.5 x 11cm
Weight: App 430g
Collagen Composition: Carrageenan, PEG-5M, Tartaric Acid, Glucomannan,
Sodium Carbonate, Maltodextrin, Sodium Bicarbonate, Potassium, Chloride ( Please read the instructions before use )
1 x Host
1 x Mask Plate
1 x Cup
1 x Brush
1 x Dials
1 x Power Lines
1 x Collagen
1 x Brochures
1. Hundreds of mask heart to do, pure natural.
2. Five minutes of production time.
3. Microcomputer intelligent control, automatic mixing, automatic film, automatic cleaning.
4. Automatic cleaning, UV disinfection.
5.ABS integrated mask, refused to fold.
6. A key to switch, easy to operate.
7. Pure natural whitening, absorb faster, the better.
8. Intelligent voice prompts.
Mask Machine Operation:
1. The level set the mask plate to the host, right on the machine power supply, machine
drops a ring, on the left side of the mask making lights flashing at the same time.
2. The water and dilute good film of face of raw materials, according to the 60 ml, respectively,
and 20 ml in order in the mask machine ( note: the mask machine with water level detection device ),
use the machine for measuring cups along the material mouth respectively into the machine, remove
capsule shells, and into an active peptide collagen peptide, light electric shock source button to start the machine.
3. After five minutes, sirens, the machine makes facial mask, according to the membrane keypad,
mask solution flows, mask. Really enjoy this mask machine bring infinite pleasure.
Mask Machine Cleaning Mode:
1. The mask well, light touch switch button, into the clean pattern, lights flashing in a row,
then pour into about 85 ml water, drops two sound, the machine makes stop adding water,
light touch keys, cleaning and disinfection began to (do what milk mask suggested by machine
with cleaning brush to clean the machine at the bottom), 5 minutes, wash lights flashing and buzzer
example, hold out the membrane keypad, let the dirty water into the mask after cleaning or measuring
cup, clean finish (note: the flow of water out after 3 min cooldown).