1. 10x10Holes, total 100 holes.
2. For personal use, professional grade lab use, university, sample testing.
Size: About 15.7cm x 15.7cm x 7cm/6.2'' x 6.2'' x 2.8''
Hole size: About 0.7cm/0.3''
1pc X Body Plate
1pc X Alignment Plate
1pc X Cap Plate
1pc X Middle Plate
1pc X Powder Spreader
1pc X Powder Pressing Plate
(Not include capsules)
How it Works:
1. Take the cap plate. Place it on a clean, dry surface.
2. Place the alignment plate on top of the cap plate.
3. Pour capsule caps into the alignment plate and, using a circular motion, gently shake the caps into the holes.
4. When the holes are filled with the caps, pour out the excess caps.
5. Now take the body plate. Fix the alignment plate to the body plate.
6. Pour bottoms into the alignment plate and shake as before to fill the holes. Pour off excess bottoms.
7. Pour a scoop of powder filler onto the body plate and use the spreader to fill the bottoms.
8. Take the filled cap plate and place the Middle plate on top .
9. Turn the cap plate / middle plate over and fix to the body plate.
10. Using both hands and equal pressure, press down once to fit both parts of the capsule together.
1.Please allow 1-3cm error due to manual measurement.Pls make sure you do not mind before you bid.
2.The color may have different as the difference display,pls understand.